Catalyst 2960 48 10/100 + 2 1000BT LAN Base Image
Condition: Brand New Sealed
Availability: In stock
Model
WS-C2960-48TT-L
Format & Standards
Standards
IEEE 802.1s
IEEE 802.1w
IEEE 802.1x
IEEE 802.3ad
IEEE 802.3ah (100BASE-X single/multimode fiber only)
IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T
ports
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p CoS Prioritization
IEEE 802.1Q VLAN
IEEE 802.3 10BASE-T specification
IEEE 802.3u 100BASE-TX specification
IEEE 802.3ab 1000BASE-T specification
IEEE 802.3z 1000BASE-X specification
Network Management Type
Other
Primary Ports
48 x 10/100Mbps ports
2 x 10/100/1000Mbps uplinks Port
Primary Port Speed
10/100Mbps + 1000Mbps
Data Transmission
MAC Address Table
8000
VLAN Support
Yes
Jumbo Frames
Yes
Details
Buffer Memory
64 MB DRAM
32 MB flash memory
Cabling
10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5
unshielded twisted-pair (UTP) cabling
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP
cabling
1000BASE-SX, -LX/LH, -ZX, -BX and CWDM SFP-based ports: LC fiber
connectors (single/multimode fiber)
100BASE-LX, -BX, -FX: LC fiber connectors (single/multimode fiber).
LEDs
Per-port status: Link integrity, disabled, activity, speed,
full-duplex
System status: System, RPS, link status, link duplex, link speed
Power
100-240VAC (autoranging) , 1.3-0.8A, 50-60 Hz
Features
Ease of Use and Deployment
Superior Redundancy for Fault Backup
Integrated CISCO IOS Software Features for Bandwidth Optimization
Advanced QoS
Granular Rate Limiting
Port-based ACLs for Layer 2 interfaces allow application of
security policies on individual switch ports.
Unicast MAC filtering prevents the forwarding of any type of packet
with a matching MAC address.
Unknown unicast and multicast port blocking allows tight control by
filtering packets that the switch has not already learned how to
forward.
SSHv2 and SNMPv3 provide network security by encrypting
administrator traffic during Telnet and SNMP sessions. SSHv2 and
the cryptographic version of SNMPv3 require a special cryptographic
software image because of U.S. export restrictions.
Bidirectional data support on the Switched Port Analyzer (SPAN)
port allows the CISCO Secure intrusion detection system (IDS) to
take action when an intruder is detected.
TACACS+ and RADIUS authentication enable centralized control of the
switch and restrict unauthorized users from altering the
configuration.
MAC address notification allows administrators to be notified of
users added to or removed from the network.
DHCP snooping allows administrators to ensure consistent mapping of
IP to MAC addresses. This can be used to prevent attacks that
attempt to poison the DHCP binding database, and to rate-limit the
amount of DHCP traffic that enters a switch port.
DHCP Interface Tracker (Option 82) feature augments a host IP
address request with the switch port ID.
Port security secures the access to an access or trunk port based
on MAC address.
After a specific timeframe, the aging feature removes the MAC
address from the switch to allow another device to connect to the
same port.
Dimensions
17.5" x 9.3" x 1.7"
Weight
8.0 lbs.
Temperature
32 to 113°F (0 to 45°C)
Humidity
10 to 85% (noncondensing)
Disclaimer
Registration Phone
1-800-Go-Cisco
Shipping
| Delivery Options | Estimated Delivery Time |
| DHL | 2-3WORKING DAYS |
| FEDEX | 2-4WORKING DAYS |
| TNT | 2-5WORKING DAYS |
Please note: Above mentioned information are just for your
reference only,we will keep you posted for the tracking delivery
schedule.
Return Material Authorization (RMA) Process
If your Cisco products failed, you must contact your sales
representative to verify product failure. If the problem still
can't correct by remote support methods i.e. email or phone
support, the RMA procedure will issue.
Payment Methods
Wire Transfer/Money Gram/Western Union
